Configuration for Microsoft Windows
95, 98, or ME
Fixing a
Connection That Won't Log On
Some users are
able to reach the Teltian home page, but find they are unable to log in. The
following steps should solve this problem:
Disconnecting
Completely
Disconnect
your wireless adapter from your computer for a period of three to five minutes.
Re-connect your adapter and attempt to log on as normal.
Restarting
Your Computer
If you are
still unable to log in, try to disconnect again by following the instructions
above, then shut your computer down. Restart your computer and try to log in.
Check Your
Wireless Configuration
|
Click
on Start, then Settings, then click on
Control Panel. |
|
|
Double-click on the Network icon. |
|
|
Click
on the Properties button. Then click on the Advanced tab on the
screen that appears. |
|
|
Click on ESSID.
This must be set to wifi (all lower-case
letters). Click on Operating Mode. This must be set to Infrastructure. Also, make
sure that Encryption Level is set to None. Click OK. Click OK. Restart your
computer. |
Renew Your
IP Address
|
Click
on Start, then click on Run. |
|
|
Type
command and click OK. |
|
|
Type
winipcfg, then hit <enter>. |
|
|
In the top
box, select your wireless card or USB adapter. Click on Release
All. (If this option is not available, click on Release.) Click on Renew
All. (If this option is not available, click on Renew.) Click OK. At your
command prompt, type exit, then hit <enter>. |
|
